Product No.: fs-zs101
Scope of application: glue filling and curing cooling line for vehicle mounted power supply; Connect with glue filling line and robot to provide mes connection
Automobile power supply glue filling and curing cooling line; Provide mes docking technical parameters for docking with glue filling line and robot: 1. Process flow; Beat 180s; Tooling plate 480 * 480; The product height is 350 (including tooling plate). The last vacuum pumping and glue filling are completed - it enters rail A or rail B for curing - the stopper stops - it meets the curing time of curing furnace (30-48 min). Release - it enters the transverse transfer machine - it rotates 180 degrees - it scans the code - it enters the cooling furnace - it cools forcibly for 30 min - it leaves the cooling furnace;
1. Overall dimensions; 5820*4850W*2200H
2. Equipment structure: overall horizontal layout, four station horizontal transplanter is set at both ends, curing drying channel and cooling channel are set in the middle, curing furnace has two channels in one layer, and cooling channel has one layer. There are two channels standing in the direction of curing furnace outlet, heating curing channel is set on the left side, and cooling channel is set on the right side; The conveyor line is 865mm high; It adopts single speed chain conveyor of Deloitte, with medium block cylinder;
3. Temperature range; Normal temperature - 85 ℃ temperature control accuracy; ±1℃
4. Wind direction; Circulating air supply
5. Power: 36KW