Aging room classification
1、 Room isolated test system type
The room size of the room isolated aging room is designed according to the customer's requirements. The entrance and exit doors are insulated sliding doors or double insulated doors. In addition, observation windows can be set as required to facilitate the observation of indoor product testing outdoors. If the power supply is required, the power socket shall be installed at a place convenient for operation to meet the needs of product aging test. Features: low requirements for product style and trolley style, large activity space, simple structure and low cost.
2、 Chamber isolated test system
The room size of Chamber isolated aging room is designed according to the customer's requirements. Sliding doors and large angle glass windows are used in the test area. If the product needs power supply, domestic sockets are used to fix it on the product trunking or at a convenient location in the test area. Features: The operator can test the product up and down without entering the aging room [1] test area, and can clearly see the B/I status of the product during the test process; It can save energy by eliminating operators from suffering from overheating when entering aging rooms.
3、 Mobile test system type
The mobile aging room is directly processed into finished products in our company (if the required volume is too large, it is assembled at the customer's site), and the size of the trolley is designed according to the customer's requirements. It is suitable for small batch testing of small output or R&D test products. Other parts are similar to the Chamber test system. Features: small floor area, and can be moved at any time.
Details of aging room
1. Main technical parameters:
1.1 Temperature range: RT+10 ～ 400 ℃
1.2 Temperature fluctuation: ± 0.5 ℃;
1.3 Temperature deviation: accuracy ± 2 ℃ (accuracy can be designed according to customer requirements, and it can reach ± 1 ℃ under certain conditions)
1.4 Room size: temperature can be customized
1.5 Operation mode: temperature adjustable, constant operation or program operation (optional touch screen program operation)
1.6 Installation power supply: AC~380V; 50 Hz；
1.7 Noise level: ≤ 65 dB
1.8 Product model: CLM-LHF-010, CLM-LHF-020, CLM-LHF-030, CLM-LHF-040, CLM-LHF-050
2: Chamber structure and material description:
2.1 Wall materials: The warehouse body is assembled with double-sided color steel insulation warehouse boards (EPS boards, polyurethane boards or rock wool boards). The thickness of the boards is selected from the needs of the aging room itself and the requirements of customers in both directions. The thickness of the warehouse boards is 50mm, 60mm, 70mm, 100mm, etc. The thickness of the color steel plates is 0.326mm, 0.5mm, etc. The whole warehouse body is supported by steel frame structure, aluminum profiles, etc, The inside and outside of the warehouse body are wrapped with aluminum profiles or stainless steel plates; (The ground treatment part is based on the customer's requirements). The joint is sealed with glass glue to effectively ensure the tightness and aesthetics of the room. (The combustion performance of the room materials shall comply with the provisions of Class B2 in Classification of Combustion Performance of Building Materials.
2.2 Door opening and window design: according to actual requirements;
3: Wind constant temperature system;
The wind duct system conforms to the Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering (GB50243-2002) and is usually composed of a circulating system, a heating system and an over temperature exhaust system. The circulating system, over temperature exhaust system, heating system and supporting air duct system are installed on the roof of the aging house, and do not occupy other spaces. The circulating system uses a circulating fan and supporting air duct for circulation, which can ensure uniform temperature in the test area. The heating system uses an electric heater, and the heater is placed in the circulating air duct on the roof of the aging house, with fire and heat insulation materials added around. The PLC temperature module or PID instrument is used for control. After the temperature reaches the required temperature of the product, the power of the heater is automatically adjusted according to the indoor temperature fluctuation to coordinate with the thermal insulation of the insulation board, so that the indoor temperature is accurate and stable at the set temperature value. The room temperature can be increased to the set temperature within a specified time. When the temperature rises to the set value, the heater stops heating The heater is equipped with an overheating protection device (EGO). If the customer's product heats up, an overheating exhaust system will be used. If the heat is small, an electric shutter will be used for automatic negative pressure exhaust. If the heat is large, a low-noise fan will be used for exhaust. The speed of the fan will be controlled by a frequency converter.
Cycle temperature control process: when the heater starts to heat when the temperature reaches the set value, the heater stops heating. As time goes by, the temperature in the product area will gradually rise. When the temperature exceeds the set upper limit, the exhaust system will start to act to exhaust the superheated gas in the product area. The frequency converter will control the outdoor exhaust fan to operate. When the temperature drops to the lower limit of the set value, the fan will stop exhaust, and the exhaust system will be closed at the same time. The circulation system always keeps the circulation state in the process of aging products to ensure the temperature balance. The whole system is characterized by stable performance, accurate control, low temperature fluctuation, high balance and low noise.
Noise treatment: low decibel high quality circulating fan is used, and the air duct is wrapped with 3mm thick asbestos, which can not only keep heat but also reduce noise. According to the acoustic principle, all dynamic parts are soft jointed with canvas and spring, so as to reduce the noise to a lower standard.
4: Aging room control system;
The two-stage PID is used to adjust the heating amount to achieve accurate control of the temperature in the test area (product area). At the same time, the temperature controller can display any temperature in the test area in a rolling real-time manner. If there is an independent load, the temperature in the load area can also be monitored to prevent the temperature in the load area from being too high, so that customers can accurately master the temperature in the test area. The control system is also equipped with various protection functions, including over temperature alarm protection, fan fault alarm protection, windless alarm protection, indoor smoke induction alarm protection, etc. The perfect protection function ensures the long-term stable and trouble free operation of the aging room. (PLC can be selected for control)
5: Product test rack: (optional)
Product test racks are usually designed according to customer products and requirements. If the load is required, the corresponding load frame shall be produced. The design of the general test frame requires stable and reasonable structure, convenient operation, beautiful appearance, function and other characteristics to meet the customer's requirements to a large extent.
6: Control system design and safety protection measures:
6.1 Electric control design shall refer to Code for Design of Low Voltage Power Distribution (GB50054-95), Code for Design of Power Supply and Distribution (GB5002S2-95) and Code for Construction and Acceptance of Grounding Device in Electrical Equipment Installation Engineering (GB50169-92) to standardize the electric control design.
6.2 Integrated aging function design of control system. The functional control cabinet is designed, and the time, temperature and various operation switches required for aging can be operated on one control cabinet; The electric cabinet panel is beautiful in design and simple in operation.
6.3 The aging process can be fully automatically controlled, with some abnormal self processing functions, so that the operation is automatic and simple.
6.4 It has multiple protection functions and is safe and reliable.
a. The electric heating prevents dry burning. When the fan fails or the temperature in the air duct is too high, the power of the circulating system will be cut off automatically, and the alarm will give an alarm at the same time.
b. Electric heating and fan linkage design, when the fan fails to start, the heater cannot be started independently, and when it is closed, the electric heating and circulating fan are closed at the same time, to prevent the electric heating from being damaged due to dry burning.
c. The heater is connected with high temperature resistant wire, and 300OC does not burn.
d. Explosion proof lighting lamps are installed indoors to improve the service life of bulbs and prevent them from bursting.
e. The warehouse body is made of fire-resistant thermal insulation materials with good thermal insulation performance and high safety factor.
f. Overtemperature audible and visual alarm function: in case of overtemperature during aging, the red light will be on and the buzzer will sound.
g. Smoke alarm function: smoke detector is installed in the room to prevent the product from burning for some reason in the process of aging products and giving an alarm. When giving an alarm, the power of the aging room is automatically turned off.
Determinants of the cost of aging houses
Determinants of the cost of aging houses
The price of aging houses is composed of the following factors
1: Room size (room size determines fan type selection, fan number, and duct size)
There are usually axial flow fans, centrifugal fans and air cabinets in the market
The axial flow fan is installed on the roof of the aging house. The corresponding louver window is installed on the ceiling according to the number of fans. The concept of upper air outlet and upper air return is adopted. This method has low cost and low controllability of temperature uniformity, because the hot air is from bottom to top
The centrifugal fan is installed on the roof of the aging house, and the corresponding number of air ducts is designed according to the power of the fan and the size of the room. Each air duct is connected to the bottom of the room. Two double-layer louver outlets are installed on each air duct, and the air outlet can adjust the air outlet direction. Then the air will be circulated from the air return outlet at the top. Generally, the aging room with a small room adopts centrifugal fan.
The fan cabinet is mainly used when the room of the aging room is too large, the span is too wide, and the temperature uniformity is too high. If the room is too large, the number of centrifugal fans used will increase accordingly, and the noise will be great. This cost is very high,
2: Temperature range (different materials are selected depending on the temperature range)
At present, the commonly used thermal insulation material on the market is high-density rigid polyurethane foam. The appearance is 304 stainless steel, its high temperature resistance is 85 degrees, its hardness is good, and its shape and quality are good. Especially for large-scale aging rooms, this material must be used. It is also easy to disassemble and assemble, which is convenient for the relocation of aging rooms. But the price is relatively expensive, but most professional companies will use it.
In addition, EPS color steel plate is mainly used for aging from normal temperature to 60 degrees. EPS color steel plate, commonly known as foam plate, is not flame retardant. It does not comply with the provisions of B2 in Classification of Burning Performance of Building Materials. It has no problem in long-term use below 60 degrees. Rock wool color steel plate is above 60 degrees, but these two materials are weak in hardness, thick in thickness, and relatively heavy. Large aging rooms are dangerous to collapse, and are not conducive to disassembly and relocation, But the price is relatively cheap. Many non professional companies, considering the production cost, will choose, but after-sales will also be quite troublesome.
3: Products to be aged and product power (different products refer to whether the product is hot, and power refers to the configuration of internal power supply)
Power of aging products: In the aging room, power shall be supplied to the aging rack of products. The power involves the size and quantity of wire rods. If the heating of products involves wire rods, civil or military wire rods shall be used.
4: Temperature uniformity requirements
The temperature of the aging room is generally ± 1 ℃ at 40 ℃, ± 3 ℃ at 50 ℃, and 60 ℃
The above temperature is ± 5 ℃. If the uniformity requirement is too high above 60 ℃, PLC can be used to implement multi-point control or control in the mode of slave and master.
5: The temperature point at which the product is often aged and the total power of the product (involving the exhaust system, the exhaust air is determined at a constant temperature point according to the room size and temperature range and the power of the product. When the product heats too high, the exhaust fan operates to ensure that the temperature is controlled at the set temperature)
Common temperature point of aging room: referring to the exhaust system, the power of exhaust fan and the size of exhaust pipe can be calculated according to the total power (heating power) of products in the aging room and the required temperature. At present, the advanced technology on the market is hot air circulation technology, which has good temperature uniformity.
Characteristics of aging room
1. The temperature control is accurate with high accuracy. Due to the unique air duct system design and electric control system, the temperature of the whole room can be highly uniform, which is much higher than that of similar products.
2. The set temperature range of the room is wide and continuously adjustable. It can be set arbitrarily within the range of normal temperature+5 ℃－ 60 ℃ (normal temperature+5 ℃－ 80 ℃). Higher temperature products can be designed if specially required by customers.
3. The system has complete protection functions to ensure safe, long-term, stable and trouble free operation.
4. The structure design of the laboratory is advanced and reasonable, and the supporting products and functional components have advanced level ahead of the peers, which can meet the long-term, stable, safe and reliable production needs. It can meet the processing and production requirements of users for the above purposes, and it is easy to use, operate and maintain, has a long service life, beautiful appearance, and has a good user interface, making the user's operation and monitoring more simple and intuitive.
5. The main parts of the equipment shall be high-quality products from well-known domestic and foreign brands to ensure the quality and performance of the whole machine
6. Beautiful appearance, convenient construction and short construction period.
Note: This test equipment is prohibited
1: Test and storage of samples of flammable, explosive and volatile substances
2: Testing and storage of samples of corrosive substances
3: Testing or storage of biological samples
4: Test and storage of samples of strong electromagnetic emission source
Company Profile
Suzhou Fengshuo Automation Equipment Co., Ltd., formerly known as Suzhou Huada Electromechanical Equipment Factory, is a modern high-tech enterprise specializing in liquid and powder dust-free coating equipment engineering and automatic conveying equipment engineering. The company integrates the planning, research and development, manufacturing, installation, service, and technology output of the whole factory, and implements the one-stop service of product research and development, production, installation, sales, and post sales. To meet customers' needs with better product quality, perfect service system and high work efficiency. The products are widely used in: automobile industry, motorcycle industry, 3C industry (mobile phones, computers, household appliances), decorative building materials, sports equipment, wooden furniture, engineering machinery, lighting, electronics and other industries.
With the rapid development of modern economy and science and technology, we always pay attention to strengthening the introduction and reference of advanced automation technologies at home and abroad. Relying on well-known domestic enterprises, the company has established good cooperation relations with many famous brand enterprises of chopsticks by virtue of its own technological advantages. For example, Panasonic Semiconductor Co., Ltd. of Japan, Foxconn Group of Taiwan, Haier Group of Qingdao, BenQ Telecom of Suzhou, Bosch Automotive Parts (Suzhou) Co., Ltd. of Germany, Samsung Electronics (Suzhou) Co., Ltd. of Korea, Asus Computer Co., Ltd. of Suzhou, Uni President Group of Taiwan, Kesheng Technology of Taiwan, Shanghai Volkswagen Co., Ltd., Shanghai Huhao Automobile Parts Co., Ltd Well known enterprises such as American Lode Machinery (Shanghai) Co., Ltd. have undertaken dozens of large-scale painting projects and automatic conveying equipment projects, and provided high-quality services and technical guidance. At this prosperous time, we are willing to bring all our colleagues together to create a new trend of business with domestic enterprises based on the principle of "quality first, creating better".
Professional production:
Coating equipment: plastic spraying line, hardware powder, liquid paint baking line, hardware pretreatment production line, coating line, silk screen line, water filter cabinet, electrostatic precipitator cabinet, spray booth, UV curing furnace, IR curing furnace,
Drying equipment: oven, dust-free oven, explosion-proof oven, anti oxidation nitrogen flushing oven, tunnel furnace, aging room,
Conveying equipment: conveying line, assembly line, assembly line, roller line, chain plate line, double speed chain line, assembly line,
Dust free purification equipment: dust free compartment, epoxy floor, transfer window, clean workbench, clean shed, sampling vehicle,
Environmental protection equipment: fresh air cabinet, central air conditioner, purification cabinet, secondary purification cabinet, waste gas treatment, dust collection box,
Test equipment: constant temperature and humidity tester, life tester, tensile tester, salt spray tester, environmental tester
Contact: Manager Lian Genrong
Business address: Building B1, Shizhuang Industrial Zone, Linhu Town, Wuzhong District, Suzhou, Jiangsu, China
Postal code: 215106
Tel.: 86 512 66300668-801
Fax: 86 512 66300667
Mobile: 13912610668
mail box: skyfeeson@yahoo.cn
Company homepage: http://www.feeson.
Aging room, also called aging chamber, burning room, simulation is for high-performance electronic products give a kind of high temperature, bad environment testing equipment, is one of the important experimental equipment to improve product stability, reliability, and is the production enterprise important production to improve product quality and the competitive process, the equipment is widely used in power electronics, computer, communication, biological, pharmaceutical and other fields.
Aging room introduction
CLM aging room, also called high and low temperature laboratory or room temperature, is for high-performance electronic products (such as: computer machine, monitors, terminal machine, automobile electronic products, power supply, motherboard, monitors, switching charger, etc.) the simulation of a kind of high temperature, bad environment testing equipment, is one of the important experimental equipment to improve product stability, reliability, and is the production enterprise important production process, to improve product quality and the competitive the equipment is widely used in power electronics, computer, communication, biological, pharmaceutical and other fields. According to the requirements of different configuration subject system, the main electrical system, control system, heating system, temperature control system, wind, temperature, time control systems, test load, etc., through this test to check out the bad product or bad thing, nor is a customer provide effective means to quickly find and solve problems, to fully improve customer production efficiency and product quality. , but also for switching power supply, cell phone chargers, batteries, LCD, main machine, scanner, monitor, and interface card do a load or temperature aging test equipment, the equipment outside frame structure with heat preservation library board compartment, deserve to go up the main distribution box, test rack, all kinds of electric switch, temperature controller, timer, heating heater, plate frame, sliding door, circulation fan, exhaust fan, socket and other equipment to simulate a kind of high temperature, bad environment (40 ℃ to 70 ℃ + / - 5 ℃, power ON - OFF action, etc.), make the product in this environment to simulate the load power, test time can be arbitrarily set at 0-99.9 hours, through this test procedure can be found to bad product or bad parts, is necessary for process, quality control equipment. Because of the performance of aging room and environment must ensure the quality of products the required temperature, power, load, working time and the safety of the operators, habits and other requirements, therefore, a qualified aging equipment, should be a safe and reliable, high efficiency and energy saving, important function has the scalability of the equipment.
Product use: is widely used in power electronics, computer, communication, biomedical and other fields.
Aging room classification
A, the room type isolation type test system
Isolation room type aging room room size are designed according to customer requirements, to go out into the insulation sliding door or double insulation door open, the other can be set according to need observation window, convenient in outdoor observed indoor product testing. For power supply is convenient in operation the location of the installation power socket, so as to meet the needs of product aging test, the characteristic: low requirements for the style of the product and the style of the car, activity space, simple structure and low cost.
Second, Chamber type isolation type test system
Aging Chamber isolation type room room size are designed according to customer requirements, test area adopts sliding door and large Angle of glass Windows, such as product need power supply, domestic famous brand is adopted at fixed socket on the product lines of slot or fixed in the position of testing area and convenient operation. Features: can make the operator in [1] don't have to enter the aging room test area can test the product and testing process be clear at a glance up and down the picture of product B/I see; From operating personnel entering aging room indoor weather room body of overheating, can save energy more.
Three, movable type test system
Mobile aging room directly processing to finished products in our company, such as demand volume is too big at the scene of the customers both assembled), pallet size are designed according to customer's requirement. Suitable for production or research and development test product small batch testing, less, other parts similar to Chamber test system, features: cover an area of an area small, can move move at any time.
Aging room details
1. The main technical parameters:
1.1 temperature range: RT + 10 ~ 400 ℃
Temperature fluctuation: 1.2 + / - 0.5 ℃;
1.3 temperature deviation: maximum precision plus or minus 2 ℃ (according to customer request design precision, under certain conditions the highest can be + / - 1 ℃)
1.4 size: inside the room temperature can be custom-made
1.5 operation modes: constant temperature is adjustable, running or program is run (optional touch screen program is run)
1.6 installation power supply: AC ~ 380 v; 50 Hz.
Size: 1.7 noise ≦ 65 decibels
1.8 product model: CLM - LHF - 010, CLM - LHF - 020, CLM - LHF - 030, CLM - LHF - 040, CLM - LHF - 050
2: the room structure and materials:
2.1 wall materials: library of used double-sided color steel heat preservation library board (EPS board, polyurethane board or rock wool board) to assemble and become, plate thickness requirements and customer requirements by the aging room itself two-way selection, library board plate thickness of 50 mm, 60 mm, 70 mm and 100 mm specifications, choi steel thickness of 0.326 mm, 0.5 mm, such as specifications, the whole library adopts steel structure, aluminum and other fixed support, library use aluminum or stainless steel plate edge in vivo and in vitro; (ground processing according to customer requirements), joint sealing glass glue, effectively guarantee the sealing of the room with the beautiful sex. (building materials combustion performance is in line with the building materials combustion performance grade B2.
2.2 door and window design: according to the practical requirements;
3: wind constant temperature system;
Wind pipe system in accordance with the ventilation and air conditioning engineering construction quality acceptance specification "GB50243-2002 standard, usually adopt circulation system, heating system and overtemperature of exhaust system. Circulation system and overtemperature exhaust system, heating system, and form a complete set of aging air duct system installed on the roof, not occupy other space, and circulation system adopts the circulation fan and duct for circulation, can ensure uniform test zone temperature, heating system using electric heater heating, circulating air duct heater placed on aging the roof, fireproof and heat insulation material. PLC module or PID temperature control, temperature, temperature reaches the product need according to the indoor temperature fluctuation automatically adjust heater power size with heat preservation, heat preservation library board to make indoor temperature precise and stable in the numerical can set temperature to room temperature within a specified period of time to add to the set temperature, heater stop heating when the temperature rose to set value. The heater has overheating protection device (eog), such as the customer's own product fever is the hot exhaust system, small heat negative pressure ventilation, using electric shutter automatic calorific value is with low noise fan, exhaust, with a frequency converter to control its speed.
Circulating temperature control process: when the heating temperature of heater to reach the set value when the phone is switched on heater stop heating With the passage of time the product zone temperature gradually rises when the temperature more than set time limit Exhaust system began to action of overheating or vent outdoor products area. Inverter can control room should be run, outside the fan when the temperature dropped to under the set value limit stop exhaust fan, exhaust system and close. Circulation system in the process of aging products always maintain circulation state, to ensure the equilibrium temperature. The system has stable performance, control precision, small temperature fluctuations, equilibrium degree is high, low noise, etc.
USES low decibel noise treatment: the high quality of circulation fan, duct using 3 mm thick asbestos packages, heat preservation and reduce noise, according to the principle of acoustics, canvas, spring is adopted to improve the soft all dynamic parts processing, makes every effort to keep noise to a minimum standard.
4: aging room control system;
By two-stage PID plus heat, realize the accurate control of test area (area) temperature, at the same time temperature controller can be arbitrary temperature rolling real-time display of test area, independent of load can also be to monitor the temperature load, to prevent the load zone temperature is exorbitant, facilitating the clients to accurately grasp the test zone temperature. Control system also set up various protective functions, overtemperature alarm protection, fan fault alarm protection and alarm protection, there is no wind indoor smoke sensor alarm protection, perfect protection function to ensure the aging room can long-term stable trouble-free operation. (optional PLC to control)
5: product test frame: (optional)
Product testing frame is usually according to customer requirements and product design system. If you want to load, then do the corresponding load framework supporting production, the design requirements of general test frame structure reasonable, easy to operate, beautiful appearance and meet the function characteristic, the maximum to meet customer requirements.
6: control system design and safety protection measures:
6.1 electric control design reference specifications for design of low-voltage distribution GB50054-95, the power supply design specification GB5002S2-95, the electric device installation and acceptance specification for construction of grounding device GB50169-92, standardize electrical control design.
6.2 aging control system integration function design. Electrical control cabinet design function, aging temperature and time, all kinds of required switch can be controlled in a electric ark operation; Electrical counter board design is beautiful, operation is simple.
6.3 aging process can be fully automatic control, has some abnormal since the processing function, make automation, simple operation.
6.4 with multiple protection function, safe and reliable.
A. electric heating dry, the fan fault or circulatory system power will be shut off when the air temperature is too high, alarm and alarm at the same time.
B. linkage design, electrical heating and fan fan failed to start the heater can't separate start, at the same time in the closed electric heating and circulation fan shut down, prevent damage of electric heating due to dry burn.
C. heater connection using high-temperature wire, 300 oc not burning.
D. indoor installation type explosion-proof lighting, increase lamp life, prevent the light bulb blasting.
E. library with flame retardant insulation materials, heat preservation performance is good, high safety coefficient.
F. overtemperature sound and light alarm function: overtemperature condition, appeared in the process of aging is bright red light, buzzer sounds.
G. smoke alarm function: indoor equipped with smoke alarm, to prevent some reason make the products in the process of aging products combustion and alarm, the alarm automatically shut down when the aging room power supply.
The decision of the aging room cost factors
The decision of the aging room cost factors
An aging house price is composed of the following factors
1: room size (room size decide the fan selection, fan, air duct size)
Market usually have axial flow fan, centrifugal fan, wind ark to make
Aging axial flow fan installed on the roof, according to the number of fan is installed in the smallpox corresponding shutter window, use the wind above the concept of return air, the cost of this method is low, temperature uniformity control is not high, because the heat from down to up
Aging centrifugal fan installed on roof, then according to the power of the fan and the size of the room, the number of the corresponding duct design, each duct connected to the base of indoor, in each of the duct is installed on two double shutter outlet, outlet can adjust the direction of the wind. Then from the top of inlet wind circulation. Average room is not very big aging room USES the centrifugal fan of the Lord.
If the wind GuiZhu aging room room is too big, too wide span, high temperature uniformity requirements to use, if the room is big with centrifugal fan quantity increase, the noise will be very big. The cost is very high,
2: temperature range (temperature range to choose different materials different)
On the market at present commonly used thermal insulation material is high density rigid polyurethane foam. Appearance of 304 stainless steel, its maximum heat resistance of 85 degrees, good hardness, best quality, especially the large scale of the aging room, must use the material, tear open outfit is easy, easy aging room to move. But the price is relatively expensive, but usually will use professional company.
Other EPS choi steel is mainly used for the ageing of the scope of normal temperature to 60 degrees, EPS choi steel, commonly known as foam board is not flame retardant, it is not in conformity with the "building materials combustion performance classification" the regulation of B2, use for a long time have no problem under 60 degrees, and rock wool color steel plate is in ageing temperature for more than 60 degrees, but the two kinds of material hardness is weaker, the thickness of the thicker, also more heavy, the ageing of the large room, is in danger of collapse, is unfavorable to dismantling to move, but the price is relatively cheap. Many non-professional companies, from the production costs, will choose, but after will be troublesome.
3: need aging products and power products (product involves various products whether fever, power involved in the power supply configuration)
Aging products of power: in the aging room, to give the product of aging aircraft power supply, power involves the wire size and quantity, if the product heating involves the wire by civilian or military wire.
4: the temperature uniformity requirements
Aging room temperature 40 degrees commonly when + / - 1 ℃, 50 + 3 ℃, 60 ℃
For + / - 5 ℃ above, if more than 60 ℃ high uniformity requirements can use PLC for more control or to control in the form of composite aircraft.
5: do aging temperature points and the total power of the product (involve the exhaust system, exhaust temperature is according to room size range and products to constant temperature is required in a power point, when the product is high fever exhaust fan operation to ensure that the temperature control in setting temperature)
Temperature: the aging room often do involve the exhaust system, according to the total power of the aging room products (heating power), and then according to the need to set temperature, through the corresponding formula to calculate the power of the exhaust fan exhaust duct size. On the market at present is the most advanced hot air circulation technology, the temperature uniformity is very good.
The characteristics of the aging room
1. Accurate temperature control, high precision. Due to the unique air duct system design and electric control system, can maintain a high uniformity of the room temperature, much higher than similar products.
2. Room set temperature range, continuously adjustable. In the temperature + 5 ℃, 60 ℃ (room temperature + 5 ℃ -- 80 ℃) range can be set freely. If the customer special request, can design a higher temperature.
3. The system to protect the function is all ready, to ensure safe and stable long-term trouble-free operation.
4. Laboratory of advanced design reasonable structure, supporting products and functional components with leading peer advanced level, can adapt to long-term, stable, safe and reliable production requirements. Can meet the requirements of users for the purpose of processing production, and use, operation, easy maintenance, long service life and aesthetically pleasing, has a good user interface, the user's operation and monitoring is more simple and intuitive.
5. Equipment main part selects the high quality products of well-known brand manufacturers at home and abroad, to ensure the quality and performance of the machine
6. Beautiful appearance, convenient construction, short construction period.
Note: this test equipment is prohibited
1: inflammable, explosive, easy to volatile substances sample test and storage
2: the corrosive substance sample test and storage
3: the test of biological samples or store
4: strong electromagnetic emission source of sample test and storage
Company profile
Suzhou rich automation equipment co., LTD., formerly suzhou huada electrical and mechanical equipment factory, the company is a professional engaged in liquid and powder dustless coating equipment engineering and automation equipment engineering of modern high and new technology enterprise. Company project planning, research and development, manufacture, installation, service and technology of whole factory output as a whole, the product research and development, production, installation and after sales, sales through-train service. Geared to the needs of users with excellent product quality, perfect service system, the highest efficiency to meet customer demand. Products are widely used in: automobile industry, motorcycle industry, 3 c industry (mobile phone, computer, household appliances, decorative building materials, sports equipment, wood furniture, engineering machinery, lighting, electronics and other industries.
With the modern economy, the rapid development of science and technology, we always pay attention to the introduction of advanced automation technology at home and abroad to strengthen and guide, relying on the company with the well-known domestic enterprises for the market, with its own technical advantages successively with a number of zhu name brand enterprise established the good relations of cooperation. Like Japan panasonic semiconductor co., LTD., Taiwan foxconn group, Qingdao haier group, suzhou benq corp, Germany Bosch automotive parts (suzhou) co., LTD., South Korea's samsung electronics (suzhou) co., LTD., suzhou asustek computer group co., LTD., Taiwan, Taiwan curzon technology, co., LTD., Shanghai Volkswagen, Shanghai hao automobile components co., LTD., the United States, machinery (Shanghai) co., LTD., and other famous enterprises to undertake several ten sets of large coating engineering and automation equipment engineering, and provides the high quality service and technical guidance, age comes as substantial wish with all my colleagues will be "quality as this, to create excellence" principle, with the domestic companies to create business fashion.
Specializing in the production of:
Plastic spraying line, coating equipment, metal powder, liquid paint line, metal pre-treatment production line, coating line, screen printing lines, water poon cabinets, ark of electrostatic dust removal, paint spraying machine, UV curing oven, IR curing furnace,
Drying equipment: oven, clean oven, blast oven, nitrogen oven anti-oxidation, tunnel furnace, aging room,
Conveying equipment: conveyor line, assembly line, assembly line, drum line, chain plate line, times speed chain line, assembly line,
Dust-free purification equipment: clean compartment, epoxy floor paint, transfer window, clean bench, clean booth, sample car,
Environmental protection equipment: fresh wind ark, central air conditioning, cleaning tank, cleaning tank, waste gas treatment, dust collection box,
Testing equipment: constant temperature and humidity testing machine, life testing machine, tensile testing machine, salt spray test machine, environmental test machine
Touch: the roots rong manager
Business address: China jiangsu wuzhong district suzhou city near lake town, stone village industrial zone in B1 building
Mail editor: 215106
The company telephone: 86 512 66300668-66300668
The true: 86 512 66300667
Hand machine: 13912610668
E-mail: skyfeeson@yahoo.cn
Website: http://www.feeson.cn/
